ControlAir Gas Pressure Regulators are direct-operated regulators that reduce the flow of gas being supplied, to a workable level for operating equipment and instruments. Suitable for use with compressed air, natural gas, sour gas and an assortment of other inert gases.
Showing all 7 results
ControlAir’s High Pressure Regulators and Air Filter Regulators are used extensively in the separation of oil and gas in the gas processing industry. Gas in the outlet stream initially goes through a High Pressure Regulator (Type 3500 Brass High Pressure Regulator or Type 3600 Stainless Steel High Pressure Regulator) for the first-cut pressure reduction. The Type 3500 includes 3 outles connections. One outlet is used to send supply pressure to a Liquid Level Controller (LLC) and control valve (CV) on the oil side. The second-cut pressure reduction occurs on the Type 1230 Big High Pressure Regulator. The third-cut pressure reduction occurs on the Type 1227 Little High Pressure Regulator. Finally, the outlet stream from each Type 1227 is sent to a Air Filter Regulator (Type 330 or Type 335 NACE) before it reaches the corresponding LLC and CV. The Air Filter Regulator (Type 330/Type 335) provides filtration of the natural gas, removing particulate matter and grit which can cause wear and tear on the LLC and CV. The Air Filter Regulator (Type 330/Type 335) reduces the pressure one final time, so the LLC has a suitable supply pressure for operation.
