Description
Overview
The Type 1005V Electronic Vacuum Regulator provides precise electronic control of vacuum pressure from 0 to -14.5 psi (0 to -1 bar / 0 to -100 kPa). Designed for automated pneumatic and process control systems, the Type 1005V accepts either a 0-10V or 4-20mA input signal and uses closed-loop electronic control to maintain the commanded vacuum level.
The Type 1005V incorporates two solenoid valves, an internal pressure transducer, and an electronic control board that performs PID closed-loop control. One solenoid valve controls the vacuum inlet while the second functions as a vacuum breaker. The internal pressure transducer continuously senses vacuum pressure and provides feedback to the electronic board, which adjusts the valves until the target vacuum level is reached.
With ±0.1% full-scale repeatability and linearity, ±0.5% full-scale accuracy, multiple control and monitor signal configurations, and IP65 compliance, the Type 1005V provides responsive and repeatable vacuum control for industrial automation and process applications.
Key Features
- Electronic vacuum pressure regulation
- PID closed-loop control
- Vacuum range from 0 to -14.5 psi (0 to -1 bar / 0 to -100 kPa)
- 0-10V or 4-20mA control signal options
- 0-10V, 4-20mA, or 1-5V monitor output options
- Internal pressure feedback transducer
- Dual-solenoid valve design for vacuum control and vacuum breaking
- ±0.1% full-scale repeatability
- ±0.1% full-scale linearity
- ±0.5% full-scale accuracy
- 0.8-second response
- Flow rate up to 22 scfm (640 L/min) at full open
- Electronic closed-loop design minimizes the effects of vibration, mounting position, temperature, and supply pressure
- Digital or analog input and output configurations
- IP65 compliant for wet or dirty environments
- M12 electrical connection
- 2-meter M12 cable is available as an accessory
- Optional BSP ports
- Optional kPa display
Performance Characteristics
- Vacuum Range: 0 to -14.5 psi (0 to -1 bar / 0 to -100 kPa)
- Input Signal: 0-10V or 4-20mA
- Input Impedance, Voltage: 10 kOhm
- Input Impedance, Current: 250 Ohm
- Monitor Output: 0-10V, 4-20mA, or 1-5V
- Power Supply: 24V DC
- Electrical Connection: M12 connection
- Response: 0.8 seconds
- Repeatability: ±0.1% full scale
- Hysteresis: ±0.3% full scale
- Linearity: ±0.1% full scale
- Accuracy: ±0.5% full scale
- Flow Rate: 22 scfm (640 L/min) at full open
- Port Size: 1/4″ NPT
- Ambient Temperature Range: 32°F to 158°F (0°C to 70°C)
- Weight: 1.21 lbs (0.55 kg)
- Media: Clean, dry, oil-free instrument air filtered to 5 microns
These performance characteristics provide precise and repeatable electronic vacuum regulation for applications requiring accurate control from an analog electrical command signal.
How to Select the Right Configuration
Selecting the correct Type 1005V configuration depends on the required control signal, monitor output, pressure display, port connection, and application requirements.
- Select the 4-20mA control signal for industrial current-loop control systems
- Select the 0-10V control signal for voltage-based control systems
- Choose the 4-20mA monitor output when current-loop feedback is required
- Choose the 0-10V monitor output for voltage-based feedback systems
- Choose the 1-5V monitor output when a lower-voltage feedback signal is required
- Select the standard vacuum range for control from 0 to -14.5 psi (0 to -1 bar / 0 to -100 kPa)
- Consult ControlAir for custom pressure range requirements
- Select the BSP Ports option when BSP process connections are required
- Select the kPa Display option when vacuum pressure should be displayed in kPa rather than the standard PSI display
- Consult ControlAir when power requirements differ from the standard 24V DC configuration
For additional guidance:
Applications
The Type 1005V Electronic Vacuum Regulator is designed for applications requiring electronically commanded and continuously monitored vacuum pressure. Its closed-loop control architecture makes it well suited for automated systems where repeatability, response, and electrical integration are important.
- Industrial automation systems
- Automated vacuum control
- Process vacuum regulation
- Vacuum handling equipment
- Pick-and-place systems
- Packaging machinery
- Material handling equipment
- Test and measurement systems
- Machine automation
- OEM equipment
- PLC-controlled vacuum systems
- Applications requiring electronic vacuum feedback
Principle of Operation
The Type 1005V uses a closed-loop control system consisting of two solenoid valves, an internal pressure transducer, and an electronic board performing PID control. Based on the electrical input signal, one solenoid valve opens the vacuum inlet while the second valve acts as a vacuum breaker.
When vacuum needs to increase, the inlet valve acts on the internal piston and allows air to be withdrawn. The internal pressure transducer measures the resulting vacuum level and sends feedback to the electronic control board. The controller then operates the two valves as required until the commanded vacuum level is achieved.
Models & Configurations
Type 1005V Ordering Structure
1005V-[Feedback Monitor]-B-[Control Signal][Pressure Range][Monitor Output]-[Options]
Port Size
- B = 1/4″ NPT
Feedback Monitor
- I = Internal
Control Signal
- A = 4-20mA
- E = 0-10V
Pressure Range
- V = 0 to -14.5 psi (0 to -1 bar / 0 to -100 kPa)
- X = Custom
Monitor Output
- A = 4-20mA
- E = 0-10V
- F = 1-5V
Available Options
- U = BSP Ports
- B = kPa Display; PSI display is standard
- Various power types available; standard power supply is 24V DC
The ordering diagram on page 2 of the Type 1005V specification sheet identifies the available port, feedback monitor, control signal, pressure range, monitor output, and option codes.
Accessories
- 6 ft (2 meter) M12 Right-Angle Cable: P/N 445-919-013
- “L” Type Bracket Kit: P/N 449-542-055
- “M” Type Bracket Kit: P/N 449-542-059
Technical Resources
FAQs
What is the Type 1005V electronic vacuum regulator used for?
The Type 1005V is used to electronically control vacuum pressure in automated pneumatic and process systems. It converts a 0-10V or 4-20mA electrical command signal into a controlled vacuum level.
What vacuum range does the Type 1005V provide?
The standard Type 1005V provides a vacuum range from 0 to -14.5 psi (0 to -1 bar / 0 to -100 kPa).
How does the Type 1005V control vacuum pressure?
The Type 1005V uses two solenoid valves, an internal pressure transducer, and an electronic board performing PID closed-loop control. The transducer continuously measures vacuum pressure, allowing the controller to adjust the valves until the commanded vacuum level is reached.
What control signals are available?
The Type 1005V accepts either a 0-10V or 4-20mA control signal.
What monitor output signals are available?
The Type 1005V is available with 0-10V, 4-20mA, or 1-5V monitor output configurations.
How accurate is the Type 1005V?
The Type 1005V provides ±0.5% full-scale accuracy, ±0.1% full-scale repeatability, ±0.1% full-scale linearity, and ±0.3% full-scale hysteresis.
What is the response time of the Type 1005V?
The Type 1005V has a specified response of 0.8 seconds.
What type of air should be used with the Type 1005V?
The Type 1005V is designed for clean, dry, oil-free instrument air filtered to 5 microns.
Is the Type 1005V suitable for wet or dirty environments?
The Type 1005V is IP65 compliant and is designed for use in wet or dirty industrial environments.
What electrical connection does the Type 1005V use?
The Type 1005V uses an M12 electrical connection. A 6 ft (2 meter) M12 right-angle cable is available as an accessory.
Are BSP ports available?
Yes. BSP ports are available as an option for the Type 1005V.
Can the Type 1005V display pressure in kPa?
Yes. PSI is the standard display, and an optional kPa display is available.
