T590X I/P Transducer

Type 590X Manifold Mount I/P Transducer

Compact Size, Manifold Mount

The Type 590X Manifold Mount I/P Transducer converts a variable electrical signal to a low flow proportional pneumatic output. Its compact size, light weight and immunity to shock and vibration make it ideal for use in process control valve positioner applications.

Conversion technology utilizing open loop control and a low mass magnet produces accurate pressure control at an economical cost. The Type 590X can mount in any position and is impervious to RFI/EMI interference.


Functional Specifications

  M Connection (Manifold)
Input 4-20 mA
Output 3-15 psig 0.20-1.0 BAR
3-27 psig 0.20-1.8 BAR
6-30 psig 0.40-2.0 BAR
Air Consumption

2.00 scfh @ 20 psig supply
4.94 scfh @ 85 psig supply
8.36 scfh @ 150 psig supply

Supply Pressure 150 psig (10.0 BAR) max
Flow Capacity Same as Air Consumption
Temperature Limit -67°F to 185°F (-55°C to 85°C)
Relative Humidity 75% average - 95% short time non-condensing
Impedance 260 Ohms @ 70°F
Loop Load 5.2 volts @ 70°F

Performance Specifications

<±0.5% of span
Hysteresis <±0.3% of span
Deadband <±0.1% of span
Repeatability <±0.3% of span; <±0.15% of span typical
Mounting Orientation <±0.5% / 90 degree change
Air Supply Sensitivity <.6% per 25 psig change (metric)
Vibration Effect <±1% up to 10g and 20-80 Hz
Temperature Effect <±0.75% / 100F change (metric)

Physical Specifications

Housing NEMA 1 (IP 20)
Port Sizes 3/16" NPT (M-Connection)
Media Clean, dry, oil-free, instrument air,
filtered to 40 micron
Terminal block
Mounting Manifold
Materials Housing: Chromate-treated aluminum, plastic
Elastomers: Buna-N
Trim: Stainless steel; brass; zinc-plated steel
Cover: Polypropylene
Weight 0.75 lbs (0.34 kg)

Ordering Information