Precise pneumatic control by use of an electrical signal
The ControlAir Type-100M Motorized Air Pressure Regulator is designed to provide precise pneumatic control by use of an electrical signal. This highly accurate device is well suited for pneumatic control of a system from a remote location. Utilizing two tandem synchronous AC Motors, each having it's own set of leads, but operating through a single output shaft, direction of rotation is dependant of which set of leads power is applied to. The motor is coupled to ControlAir's Type-100, which is a high precision, multi-stage air pressure regulator with low power requirements.
When no electrical power is supplied the regulator maintains a precise set point despite variable supply pressure conditions and flow rates. When power is applied to the motor the regulator pressure output changes intermittently.
|Flow Capacity||14 SCFM (396 Nl/min.) at 100 psig (7 BAR) supply |
20 psig outlet (1.4 BAR) outlet
|Exhaust Capacity|| |
5 psig (3.5 BAR) above 20 psig (1.4 BAR) setpoint
|Total Air Consumption||0.10 SCFM|
|Maximum Supply Pressure||150 psig (10 BAR)|
|Temperature Range||0° to -140° F (-18° to -60° C)|
|Available Port Sizes/Output Ranges||See Ordering Information|
|Motor Type||Reversible, synchronous motor with gear drive and slip clutch|
|Torque||Approximate 8 in. oz.|
|Motor Operating Voltage/Frequency /Speeds/Power Consumption||See Ordering Information|
Regulator/Motor Specifications - Weight - 2.75 lbs.
Approximate Time to Cover Full Range(Seconds)