 |
Type 3500 High Pressure Regulator
Accurate and reliable first cut pressure regulator |
| The Type 3500 provides a low cost, dependable regulator to reduce inlet pressures from as high as 6000 psig (413 BAR) down to working pressures ranging between 0 and 225 psig (15.5 BAR). This first cut regulator is available in three separate spring ranges. These versatile devices can be used as pilot supply or pressure loading regulators where a high-pressure operating valve must be controlled by a gas regulator pilot. The Type 3500 is designed for use with noncorrosive gases. |
|
|
|
|
|
© Copyright 2002 ControlAir, Inc.
Site designed by TG Graphics
|
