Type 100 Precision Air Pressure Regulator
Dependable, stable and highly precise precision regulation
The Type-100 is a high precision, multi-stage pressure regulator. This pressure controller provides the highest level of regulation accuracy and repeatability available. The Type-100 is ideal for applications that call for the utmost of control and maximum stability under variable operating conditions. A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve.This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms.
|Flow Capacity||14 SCFM (420 Nl/min) at 100 psig (7 BAR) supply 20 psig outlet (1.4 BAR) outlet.|
|Exhaust Capacity||5 psig (0.4 BAR) above 20 psig (1.4 BAR) setpoint Type 100 - 3 SCFM (85 Nl/min) Type 100HR - 10 SCFM (283 Nl/min) (High Relief)|
|Sensitivity||1/8" (3.2mm) water|
|Pilot Pressure Chamber Bleed Rate||less than 0.08 SCFM (2.4 Nl/min)|
|Effect of Supply Pressure Variation||of 25 psig (1.7 BAR) on outlet less than .005 psig (0.003 BAR)|
|Maximum Supply Pressure||150 psig (10.5 BAR)|
|Weight||1.4 lb. (635g)|
|Port Sizes||1/8", 1/4", 3/8" NPT/BSP|
|Gage Ports (2)||1/4"|
|Output Pressure Ranges||2-40 psi, 2-60 psi, 2-120 psi|
|Mounting Options||Pipe or panel|
|Materials||Body: diecast zinc alloy. Capsule and adjusting screw: stainless steel. Assemblies: stainless steel, brass, plated steel, acetal. Diaphragms: Buna-N elastomer and polyester fabric. Knob: phenolic plastic.|
Tamperproof Cover - to order with tamperproof cover add a "T" to end of part number. See drawing for dimensions.
BSP Porting - to order with BSP porting add a "U" to end of the model number.
Preset Pressure - Output pressure can be preset at factory. Consult factory for ordering information.
Tapped Exhaust - to order with a 10-32 trapped exhaust vent and barbed bleed screw add an "E" to end of part number.
Oxygen Compatible - consult factory for ordering information.
Mounting Bracket: - P/N: 446-707-045
Pressure Gauge - Gauge is 2in. (50.8 mm) diameter face, 1/4 NPT back connection.
0-15 psi P/N: 446-725-003
0-30 psi P/N: 446-725-004
0-60 psi P/N: 446-725-001
0-160 psi P/N: 446-725-002