T100M Motorized Precision Air Pressure Regulator
Precise pneumatic control by use of an electrical signal
The ControlAir Type-100M Motorized Air Pressure Regulator is designed to provide precise pneumatic control by use of an electrical signal. This highly accurate device is well suited for pneumatic control of a system from a remote location. Utilizing two tandem synchronous AC Motors, each having it's own set of leads, but operating through a single output shaft, direction of rotation is dependant of which set of leads power is applied to. The motor is coupled to ControlAir's Type-100, which is a high precision, multi-stage air pressure regulator with low power requirements.
OPERATION:
When no electrical power is supplied the regulator maintains a precise set point despite variable supply pressure conditions and flow rates. When power is applied to the motor the regulator pressure output changes intermittently.
Specifications
Regulator Specifications
| Flow Capacity | 14 SCFM (396 Nl/min.) at 100 psig (7 BAR) supply 20 psig outlet (1.4 BAR) outlet |
|---|---|
| Exhaust Capacity |
5 psig (3.5 BAR) above 20 psig (1.4 BAR) setpoint |
| Total Air Consumption | 0.10 SCFM |
| Maximum Supply Pressure | 150 psig (10 BAR) |
| Temperature Range | 0° to -140° F (-18° to -60° C) |
| Available Port Sizes/Output Ranges | See Ordering Information |
Motor Specifications
| Motor Type | Reversible, synchronous motor with gear drive and slip clutch |
|---|---|
| Torque | Approximate 8 in. oz. |
| Motor Operating Voltage/Frequency /Speeds/Power Consumption | See Ordering Information |
Regulator/Motor Specifications - Weight - 2.75 lbs.
|
Pressure Range
|
Approximate Time to Cover Full Range(Seconds) | ||
|---|---|---|---|
|
Psig
|
bar
|
2RPM
|
6RPM
|
|
2-40
|
0.14-2.8
|
120
|
40
|
|
2-60
|
0.14-4
|
90
|
30
|
|
2-120
|
0.14-8.3
|
150
|
50 |
